 |
Material Testing
National Exposure Testing is one of the largest corrosion testing laboratories in Ohio. We specialize in Salt Spray, Cyclic Corrosion, CASS, Humidity, Fillform, and Kesternich testing.
Scope of Accreditation
Request a quote
|
|
2010 Proficiency Program
We are now accepting enrollment for the 2010 Proficiency Program.
To register please click here and fill out our registration form.
2010 Program
Request more information
Proficiency Testing
|
|
Testing Supplies
From Arizona dust to mass loss coupons, National Exposure Testing carries a complete line of supplies and premixed solutions for a variety of testing procedures.
Testing Supplies
|
|
National Exposure Testing
3545 Silica Road., Suite E
Sylvania, OH 43560 USA
Phone: 419-841-1065
Fax: 419-841-8716
|
|
|
|
|
 |
| Scope of Accreditation: |
MECHANICAL |
| Valid To: |
October 31, 2010 |
| Certificate Number: |
1197-01 |
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on paints, coatings, and materials used on automotive and aerospace components and fasteners:
|
 |
For a complete listing, please download our scope. |
| Test Description |
Test Method(s) |
| Tape Adhesion |
ASTM D3359; FLTM BI 106-01; GM 9071P; GMW14829;International Truck CEMS GT-7G |
| Water Immersion |
ASTM D870; FLTM BI 104-01; GM 4466P;
HES D6501 Sec. 3.18 & 3.37, S84 Sec. 6.7; TSH 1551G; International Truck CEMS GT-7G
|
| Chip Resistance |
ASTM D3170; GM 9508P Method B; HES D6501
Sec. 3.33; SAE J400; TSH 1553G; Delphi DX 900163 |
| Humidity |
ASTM D1735, D2247;
GM 4465P, W3044 & W4700 (Label Compatibility); HES D6501 Sec.3.19, S84 Sec. 6.8; SAE-AMS-STD 753C Method 101; TSH 1505G; DIN 50017;
GMW14729; ISO 6270-2; ASTM D4585 |
| Salt Spray |
ASTM B117; GM 4298P; FLTM BI 103-01;
HES D6001 Sec. 4.3, D6501 Sec. 3.15.1 & 2;
ISO 9227; JASO M610; JIS Z2371;
Mil-Std 810 (Salt Spray Section); NES M0140;
TSH 1552G; DIN50021; JIS H8502 Sec. 7.1; GMW3286 |
| 20% Salt Spray |
ASTM C1503 |
| Pencil Hardness (w/ D3363 pencils) |
ASTM D3363; HES D6501 Sec. 3.5, S84 Sec. 6-4;
TSH 1500G; International Truck CEMS GT-4D |
| Dime Scrape |
GM 9506P |
| Film Thickness |
ASTM D7091, FLTM BI 117-01, ISO 2808 |
| Thumbnail Hardness |
GM 9507P |
| Solvent Rub |
ASTM D5402, GM 9509P, TSH 1551G Sec 5.2 |
| Cyclic Corrosion |
Chrysler LP-463PB-22-01; Delphi DX900115;
FLTM BI 123-01; FLTM BI 123-02; FLTM BI 123-03; GM 9505P Cycles A-O, 9511P, 9540P, 9619P; GM W14872; SAE J2334; VDA 621-415;
NES M0158, CCT-I, CCT-IV; Harley-Davidson Test Flow (Humidity/Salt Spray); Honda DWG.5100Z-SE0-0000 (CCT Portion) |
| Chipping Corrosion |
Chrysler LP-463PB-52-01 |
| Modified Salt Fog |
ASTM G85 Annex 1, 2, 3,.4 & 5 |
| C.A.S.S. |
ASTM B368; FLTM BQ 105-01; GM 4476P;
JIS H8502 Sec. 7.3; GMW14458 |
| SO2 |
ASTM G87; DIN 50018,ISO 3231, 6988 |
| Corrodkote |
ASTM B380; HES D6001 Ref. 1 |
| UV (QUV) Exposure |
ASTM D4587, G154, G151; IEEE C57.12.28-2005;
IEEE C57.12.31-2002; NES M0007 Sec. 48 UV Method; SAE J2020 |
| Cyclic Salt Fog/UV Exposure |
ASTM D5894 |
| Filiform |
ASTM D 2803 Procedures A-C;
HES D6501 Sec. 3.16.1 |
| Rating & Evaluation |
ASTM B537, D610, D714, D1654; GM 9102P, ISO 4628-2, 4628-3, 10289 |
| Temperature |
Ford WSS-M2P177-A1-5 Sec. 3.5.7;
HES D6001 Sec. 4.4.1, D6501 Sec. 3.20.1 & 2;
TSH 1551G Sec. 9 |
| Thermal Shock |
Ford WSB-M1P83-B1 Sec. 3.8.2;
GM 4372M Sec. 3.5.2; HES D6001 Sec. 4.4.4, D6501 Sec. 3.29; TSH1551G; International Truck CEMS GT-14C;
ASTM D6944 Method B |
| Heat/Quench |
Delphi DX551200,DX551300; GM W3044, W4700 |
| pH |
ASTM D1293 |
| Conductivity |
ASTM D1125 |
| Specific Gravity |
ASTM D1429 |
| Salt Water Immersion |
Chrysler MS-PB1-2; Honda DWG.5100Z-SE0-0000 |
|
|
| |
Email us at info@nationalexposuretesting.com
|
|
|
|
